Maiden Flight › Setup guides › RadioMaster & EdgeTX
Create your first airplane model
A 'model' on the radio holds everything for one airplane. One airplane, one model, always. About 10 min. For: RadioMaster / EdgeTX.
You need
- Radio
- Your airplane's manual (for throws and channel layout)
Create the model
- Open Model Select. On colour radios it's in the main menu; on black-and-white radios press MDL and the first page is the model list. The exact path varies slightly by EdgeTX version.
- Choose an empty slot and create a new model. On colour radios pick 'Blank', or an airplane template if your version offers one.
- Name it after the airplane (e.g. 'Cub 1.2m'). The name is shown on the main screen, so you always know which model is loaded. (To have it spoken too, add a model voice file. See your radio's manual.)
Model Setup basics
- Internal RF: set the mode for your receiver. Use CRSF for ExpressLRS (internal ELRS module). Use MULTI for a 4-in-1 or CC2500 multi-protocol module (protocol choice is in guide 4). Leave External RF off unless you fitted an external module.
- Receiver number: give each model a different number. This is what Model Match uses to stop you flying the wrong model.
- Timers: leave them off for now (guide 'Flight timers' covers them).
Look at what the radio created
- Inputs page: four inputs (Ail, Ele, Thr, Rud), each from its stick at 100%.
- Mixes page: CH1 Ail, CH2 Ele, CH3 Thr, CH4 Rud, which is the AETR order you set in guide 2.
- Outputs page: all channels at -100/+100 limits, no subtrim, normal direction. You'll adjust these in guide 6.
Check: you're done when
- The model is named after the airplane.
- Mixes show CH1-CH4 = Ail, Ele, Thr, Rud.
Open this in Maiden Flight Free to start. Works on phone and computer.