Maiden Flight › Setup guides › RadioMaster & EdgeTX
Get to know your radio
Before any setup, learn where everything is. Every later guide refers to these names. About 10 min. For: RadioMaster / EdgeTX.
You need
- Your radio, charged
- The SD card fitted (it ships installed)
Sticks, trims and switches
- Most pilots in the US and UK fly Mode 2: left stick = throttle (up/down) and rudder (left/right), right stick = elevator (up/down) and aileron (left/right).
- Each stick has a trim next to it. Trims make small centre adjustments in flight. They are stored per model (and per flight mode, later).
- Switches are named SA, SB, SC... The type matters: 2-position, 3-position, or momentary (springs back). Your radio's layout is shown at the top of this page.
- Pots and sliders (S1, S2, LS, RS) are analog inputs, useful for things like flap amount or gyro gain.
Buttons and menus
- SYS: radio-wide settings (hardware, sounds, firmware, tools). These affect every model.
- MDL: settings for the selected model only (RF, inputs, mixes, outputs, timers, special functions).
- TELE: telemetry screens. RTN: back out of a menu.
- Use the scroll wheel (or navigation buttons) to move, press to select, and long-press for extra options such as insert/delete on a mix line.
SD card and USB
- The SD card holds your models, voice files, Lua scripts, logs and firmware files. Never remove it with the radio switched on.
- Plug the radio into a computer with USB-C and it offers: USB Joystick (for flight simulators), USB Storage (shows the SD card for backups), or USB Serial.
- Most RadioMaster radios charge their internal cells over USB-C. Check your manual for the battery type before setting battery alarms.
Check: you're done when
- You can name every switch on your radio and say whether it's 2-position, 3-position or a button.
- You know which button opens SYS, MDL and TELE.
Open this in Maiden Flight Free to start. Works on phone and computer.