Maiden Flight › Setup guides › RadioMaster & EdgeTX
Dual rates and expo
Rates limit throw; expo softens the centre of the stick. Both live in Inputs. About 15 min. For: RadioMaster / EdgeTX.
You need
- Recommended low/high throws from the manual
Build dual rates on one switch
- Inputs > Ail: edit the existing line. Set Switch to your rates switch in the 'high' position, weight 100%, expo 30%. Name the line 'High'.
- Insert a second line below it with no switch, weight 70% and expo 25%. Name it 'Low'. Input lines are exclusive and EdgeTX uses the first true line from the top, so the switchless line is the fallback.
- Repeat on Ele and Rud with the same switch so one flick changes all three.
- Adjust the weights until the measured throws match the manual's low and high rates.
Expo explained
- Positive expo in EdgeTX makes the stick softer around centre while keeping full throw at the ends.
- Start around 25-35%. Aerobatic and 3D setups often use 40-60% on high rates.
Make it obvious
- Add Special Functions to announce 'high rates' / 'low rates' when the switch moves (Play track, 1x).
- Maiden on low rates unless the manual says otherwise.
Example
Ail [High] SB-up weight 100 expo 30
[Low] (none) weight 70 expo 25Check: you're done when
- Throws on both rates match the manual.
- One switch changes rates on all three axes.
Open this in Maiden Flight Free to start. Works on phone and computer.