Maiden Flight › Setup guides › Spektrum
Create a model and set the Aircraft Type
Create the model, set it to Airplane, then choose the wing and tail type before you touch anything else. On Spektrum the Aircraft Type builds the mixing for you. About 10 min. For: Spektrum.
You need
- Radio
- Your airplane's manual (wing and tail layout, servo count)
Create the model
- NX/DX: System Setup > Model Select, roll to the bottom of the list and choose Create New Model, then Create. NX radios then offer a blank model, a Template or a BNF file for Horizon's ready-to-fly airplanes.
- iX: tap the model name at the top left, PROCEED, Model Utilities, then the expand icon > Add a New Model. Choose Default, Template or BNF, pick Airplane and Create.
- Model Type must be Airplane. Changing Model Type later erases everything in that memory and you have to bind again, so get it right now.
- Name the model after the airplane so you can always see which one is loaded.
Aircraft Type: wing and tail first
- NX/DX: System Setup > Aircraft Type. iX: Model Setup > Aircraft Type (PROCEED to turn RF off).
- Pick the wing: Normal for one aileron servo (or two on a Y-lead), Dual Aileron for two servos on separate channels, a flap wing such as 1 Aileron 1 Flap if the airplane has flaps, Elevon for a flying wing.
- Pick the tail: Normal, V-Tail, or one of the dual elevator or rudder types.
- Do this before any other programming. The wing and tail choice sets which channels do what and which menus appear (Differential, Flap System).
- The list differs between radios. The DX6e, for example, has no 2-aileron 2-flap wing. If your airplane's layout is missing, check the manual for your radio.
Channels and plugs
- Plug in to match TAER: receiver port 1 throttle (ESC), 2 aileron, 3 elevator, 4 rudder, 5 gear, 6 aux 1.
- Extra servos from the wing or tail type use the next channels. Dual Aileron, for example, puts the right aileron on AILE (CH2) and the left aileron on AUX1 (CH6) (check the diagram in your manual).
- Channel Assign (System Setup on NX/DX, Model Setup on iX) changes which switch drives an aux channel, and which receiver port a channel goes to. Set up any mixes first: the radio won't let you mix into a channel you have already moved.
- Don't use reversing Y-leads with Spektrum receivers that have AS3X. Reverse in the radio instead.
Check: you're done when
- Model Type is Airplane and the model is named.
- Wing and tail type match the airplane.
- Each plug is in the right TAER port.
Open this in Maiden Flight Free to start. Works on phone and computer.