Maiden Flight Open the app

Maiden Flight › Setup guides › Spektrum

Get to know your Spektrum radio

Spektrum radios come in two kinds: NX and DX radios with a roller and buttons, and iX radios with an Android touchscreen. The menus have different names but do the same jobs. Learn which kind you have before anything else. About 10 min. For: Spektrum.

You need

Sticks, switches and channel order

  1. Mode 2 (most US and UK pilots): left stick is throttle and rudder, right stick is elevator and aileron.
  2. Switches are lettered A to H, plus I, a push-button. On most radios with that full set, A and H are 2-position and B to G are 3-position. Spektrum's manuals only give the counts, so check each one on your radio by flicking it with the monitor screen open.
  3. Spektrum's channel order is TAER: CH1 throttle, CH2 aileron, CH3 elevator, CH4 rudder, CH5 gear, CH6 aux 1. Every Spektrum guide here uses that order. It is not the AETR order used by RadioMaster radios.
  4. A new model puts the gear channel (CH5) on switch A. Throttle cut, rates and flaps have no switch until you give them one.
  5. Maiden Flight's switch plan for Spektrum: H = throttle cut (the same as E-flite's setup sheets), F = dual rates, D = flaps, B = flight modes, A = retracts, I = panic on SAFE airplanes.

NX and DX menus (roller)

  1. Two menu lists. System Setup holds things that change how the radio talks to the model: model select, model type, Aircraft Type, channel assign, bind, warnings, telemetry. The radio turns the RF off while you are in it.
  2. To reach System Setup: hold the roller while you switch the radio on, or press the roller on the main screen and choose System Setup from the bottom of the Function List, then confirm.
  3. The Function List holds the adjustments: Servo Setup, D/R and Expo (called Rates and Expo on newer NX firmware), Throttle Cut, Flap System, Mixing, Timer, Telemetry, Monitor. Press the roller once on the main screen to open it.
  4. Roll to move, press to select. Back steps out of a screen. Clear returns the highlighted value to its default.

iX menus (touchscreen)

  1. The iX radios run the Spektrum AirWare app on Android. Model Setup is the iX version of System Setup: opening it asks you to turn the RF off (PROCEED).
  2. Model Adjust is the iX version of the Function List: Servo Setup, Dual Rates and Expo, Throttle Cut, Flap System, Mixing and the rest.
  3. Throughout the Spektrum guides, menu paths are written as 'NX/DX: ...' and 'iX: ...' when they differ.

RF, memories and files

  1. All AirWare radios have a built-in DSMX transmitter. There is no external module bay, so you fly Spektrum DSMX (or older DSM2) receivers.
  2. Each radio holds 250 model memories. One airplane, one model memory: ModelMatch ties each receiver to the memory it was bound with.
  3. NX and DX radios save models as .SPM files on the SD card or internal memory. iX radios export .ispm files that only other iX radios can read.
  4. The DXS has no screen and no model memory. Its switches are fixed: H throttle cut, F dual rates, B on CH5, the A button on CH6, D on CH7. Servo reversing is done with the trims at power-up, so follow the DXS manual for that. Most of this course is for the radios with a screen.

Check: you're done when

Open this in Maiden Flight Free to start. Works on phone and computer.